3000W Wind Solar Hybrid Controller , 300V AC Solar Wind Controller
User should connect and operate according to following procedures
after all the parts installation of wind power system are finished.
Step 1Open the package, and then install the product after users make
sure the product without any damage.
Step 2When the dump load is separated, user should use copper wires and
connect the dumpload box output line to “DUMP LOAD” terminals in
Step 3Connect the controller DC output terminals to grid-tied inverter.
Connect wind turbine output line to control box “WIND INPUT”
terminals when the wind turbine is under static status or in low
speed running status.
Step 4Check whether all the connections are correct and firm.
TM-B-W-3KW (wind/solar hybrid controller for 3KW off-grid system )
Rated Wind Turbine Input Power
AC input Voltage Range
0-300Vac (line voltage)
Dumpload Start Voltage
Volts D.C after dump load works
300Vdc (adjustable )
Delay setting before dump load works
20 Min(adjustable )
Turbine input power , voltage ,current , generating capacity
Controller size (L*W*H)
415mm *350mm *150mm
Dump Load size (L*W*H)
420mm* 375mm* 173mm
Ambient Temperature & Humidity
-40～+70℃/35～80%RH(Exclude LCD )
Wind/solar hybrid controller for 3KW off-grid system